Influence of culture media composition on the rheology of microalgae concentrates on a large scale.

The role of microalgae in the production of bioproducts and biofuels, along with their ability to provide a sustainable pathway for wastewater treatment, makes them promising alternatives to conventional processes. Nevertheless, large-scale downstream processing requires an understanding of biomass rheology that needs to be addressed further. This study aimed to characterize microalgal concentrates rheologically in different culture media. The presence of bacteria was quantified by photorespirometry and plate counting techniques. The culture medium was found to significantly influence viscosity, with primary wastewater exhibiting the highest viscosity and seawater plus pig slurry the lowest. The concentration of heterotrophic bacteria was directly related to the viscosity. Extracellular polysaccharides (EPS) in supernatant exhibited an inverse viscosity trend compared to biomass concentrates, with pig slurry cultures having higher concentrations. These findings emphasize the profound influence of culture medium and EPS on the rheology of microalgal biomass, underscoring the need for continued research aimed at facilitating and optimizing large-scale downstream processes within the framework of a circular economy and the attainment of the Sustainable Development Goals (6,8, and 12).

Effect of Addition of Cross-Linked Starch on the Properties of Degraded PBAT Poly(butylene adipate-co-terephthalate) Films.

This work aimed to evaluate the properties of butylene adipate-co-terephthalate (PBAT) degraded after 1800 days of storage (DPBAT) by preparing blends (films) with crosslinked starch (Cm) through extrusion and thermocompression. Different ratios of DPBAT:Cm (70:30, 60:40, and 50:50 m/m) were prepared. The incorporation of Cm into DPBAT significantly changed the properties of the films by making them stiffer (increasing Young's modulus by up to 50%) and increasing the thermal resistance of DPBAT. The presence of crosslinked starch in the films made them less hydrophobic (with decreased contact angle and increased moisture content), but these parameters did not vary linearly with changes in the content of crosslinked starch in the blend (DPBAT:Cm). The microscopic images show an inhomogeneous distribution of Cm granules in the DPBAT matrix. Thus, the films prepared with PBAT show a significant decrease in their mechanical parameters and heat resistance after long-term storage. However, the preparation of blends of degraded DPBAT with crosslinked starch promoted changes in the properties of the films prepared by thermocompression, which could be useful for disposable packaging.

Innovation in Alternative Food Sources: A Review of a Technological State-of-the-Art of Insects in Food Products.

Insects present great potential for the food industry due to their easier rearing conditions and high nutritional value, in comparison with traditional livestock. However, there is a lack of evaluation of the technological status of food products developed with edible insects. Therefore, this study aims to analyze the emergent technological and scientific applications of edible insects in the food industry through a prospective study of patent documents and research articles. Espacenet was used as a research tool, applying the terms Insect, Pupa, Larva, or Nymph and the codes A23L33 and A23V2002. A total of 1139 documents were found-341 were related to the study. Orbit® was used to evaluate technological domains and clusters of concepts. Scopus database research was performed to assess the prevalence of insect research, with the term "edible and insect*". The main insects used were silkworms, bees, beetles, mealworms, crickets, and cicadas. Protein isolates were the predominant technology, as they function as an ingredient in food products or supplements. A diverse application possibility for insects was found due to their nutritional composition. The insect market is expected to increase significantly in the next years, representing an opportunity to develop novel high-quality/sustainable products.

Utilization of Agro-Industrial Residues in the Rearing and Nutritional Enrichment of Zophobas atratus Larvae: New Food Raw Materials.

Edible insects are a potential alternative food source of high feed conversion efficiency and protein content. Zophobas atratus is an edible insect that adapts to different diets, enabling sustainable rearing by adding value to by-products and agro-industrial residues. This study aimed to evaluate the performance and nutritional characterization of Zophobas atratus larvae fed with different proportions of grape residue. Physicochemical analysis of the diets and larvae (AOAC procedures), fatty acid profile (chromatographic techniques), metals and non-metals (inductively coupled plasma optical emission spectrometry), larval mass gain, feed conversion efficiency, and mortality rate were assessed. The replacement of 25% of the conventional diet with grape residue increased lipid, ash, and fiber contents and reduced protein, carbohydrates, and energy. It promoted greater mass gain, lower mortality rate, and reduced larval growth time by 51%. Among the replacements, 25% resulted in the second-highest content of calcium, sodium, magnesium, and zinc, and the lowest content of potassium and phosphorus in the larvae. The 100% replacement resulted in the highest amounts of C18:2n6 (27.8%), C18:3n3 (2.2%), and PUFA (30.0%). Replacing 25% of the conventional diet with grape residue is equivalent to the conventional diet in many aspects and improves several larvae performance indices and nutritional values.

Analysis and Modeling of Innovations in the Global Microalgae Lipids Market.

Microalgae lipids offer numerous advantages over those of plants and animals, enabling the sustainable commercialization of high value-added products in different markets. Although these markets are in a vertiginous annual expansion, technological life cycle modeling is a tool that has been rarely used for microalgae. Life cycle modeling is capable of assisting with decision-making based on data and is considered as a versatile model, usable in multiple software analyzing and diagnostic tasks. Modeling technological trends makes it possible to categorize the development level of the market and predict phase changes, reducing uncertainties and increasing investments. This study aims to fill this gap by performing a global analysis and modeling of microalgal lipid innovations. The Espacenet and Orbit platforms were used by crossing the keywords "microalgae", "lipid*", and the IPC code C12 (biochemistry and microbiology). Different sigmoid growth models were used in the present study. A successive repetition of the Chlorella genus category was found in the keyword clusters regarding extraction and separation of lipids. The life cycle S curve indicates a market starting at the maturity phase, where the BiDoseResp model stands out. The main countries and institutions at the technological forefront are shown, as well as potential technological domains for opening new markets.

Valorization of crude glycerol based on biological processes for accumulation of lipophilic compounds.

Bacteria that are capable of accumulating lipids in their cells as storage compounds can also produce polyhydroxyalkanoates of high technological value, depending on the specific culture conditions. The objective of this study was to utilize crude glycerol from biodiesel (CGB) as a substrate, which is a major byproduct from biodiesel production, to produce lipophilic compounds. Bacillus megaterium INCQS 425 was cultivated and evaluated for the production of lipophilic compounds and the properties of these compounds were investigated. Cultivation of the bacteria in a medium with a C:N ratio of 0.60:1 favored the accumulation of lipids by (17.5%) comprising mainly palmitic acid (13.08%), palmitoleic (39.48%), and especially oleic acid (37.02%), which imparts good characteristics to biodiesel. Meanwhile, cultivation of the bacteria in a medium with a C:N ratio of 4:1 favored the accumulation of polyhydroxyalkanoates (PHA) (3.31gL-1) mainly comprising medium and long chain PHA. Low crystallinity (<30%) and excellent thermal properties make them suitable for processes that demand high temperatures, such as extrusion. The lipids produced in the present study had satisfactory oxidative stability for the production of quality biodiesel. The polyhydroxyalkanoates produced in the study are of low cost and have promising thermal properties that justify its technological potential, thereby configuring highly competitive bioproducts.

Pilot-scale isolation and characterization of extracellular polymeric substances (EPS) from cell-free medium of Spirulina sp. LEB-18 cultures under outdoor conditions.

This objective of this work was to monitor the EPS production during the growth of Spirulina sp. LEB-18, evaluate the productivity and to characterize the exopolymers obtained on pilot-scale under outdoor conditions. The production of crude EPS occurred in all phases of biomass growth and was approximately ten folds higher than that biomass concentration of Spirulina sp. LEB-18 at the end cultivation, demonstrating the importance of the use of supernatant after harvesting of Spirulina to obtain high value bioproducts. The EPS extracted by Spirulina sp. LEB-18 are typically heteropolymers with one high molecular weight fraction (polysaccharides) with potential to be utilized as an alternative bioflocculant and another fraction of lower molecular mass (proteins). The presence of uronic acids, pyruvates and acyl groups of carbohydrates or carboxylic groups of amino acids in protein moiety is the main responsible for overall negative charge of EPS, which is also of biotechnological importance. Moreover, due to the pseudoplastic behavior of the solutions and high thermal stability, the obtained EPS can be widely applied in several industrial sectors, thus determining its technological and market potentiality.

Xanthan Gum Production by Xanthomonas campestris pv. campestris IBSBF 1866 and 1867 from Lignocellulosic Agroindustrial Wastes.

This study aimed to evaluate the properties of xanthan gum produced by Xanthomonas campestris pv. campestris 1866 and 1867 from lignocellulosic agroindustrial wastes. XG was produced using an orbital shaker in a culture medium containing coconut shell (CS), cocoa husks (CH), or sucrose (S) minimally supplemented with urea and potassium. The XG production results varied between the CS, CH, and S means, and it was higher with the CH in strains 1866 (4.48 g L-1) and 1867 (3.89 g L-1). However, there was more apparent viscosity in the S gum (181.88 mPas) and the CS gum (112.06 mPas) for both 1866 and 1867, respectively. The ability of XGCS and XGCH to emulsify different vegetable oils was similar to the ability of XGS. All gums exhibited good thermal stability and marked groups in the elucidation of compounds and particles with rough surfaces.

Simultaneous Biosynthesis of Polyhydroxyalkanoates and Extracellular Polymeric Substance (EPS) from Crude Glycerol from Biodiesel Production by Different Bacterial Strains.

Simultaneous synthesis of polyhydroxyalkanoates (PHAs) and polyglutamic acid (PGA) was investigated in cultures of Cupriavidus necator IPT 026, C. necator IPT 027, C. necator IPT 029, and Bacillus megaterium INCQS 425 strains in a medium containing 2.0 % sucrose or crude glycerol from biodiesel (CGB), in an orbital shaker (35 °C, 180 rpm, 72 h). All the strains tested simultaneously produced PHA and PGA in a medium containing CGB. The C. necator IPT026 culture provided higher molecular mass PHA and PGA (1128.55 and 835.56 kDa, respectively). B. megaterium INCQS 425 promoted PGA production (1.90 g L-1) with higher crystalline melting temperature (84.04 °C) and higher initial decomposition temperature (247.10 °C). Furthermore, the latter culture promoted the production of medium- and long-chain PHA (0.78 g L-1) with high crystalline melting temperatures (∼170 °C) and high initial decomposition temperature (307.53 °C) and low degree of crystallinity (20.2 %). These characteristics render these PHAs more appropriate and suitable for processes that require high temperatures, such as extrusion, increasing the possibility of industrial applications, especially in the packaging sector.

A study of the effects of aeration and agitation on the properties and production of xanthan gum from crude glycerin derived from biodiesel using the response surface methodology.

The effects of aeration and agitation on the properties and production of xanthan gum from crude glycerin biodiesel (CGB) by Xanthomonas campestris mangiferaeindicae 2103 were investigated and optimized using a response surface methodology. The xanthan gum was produced from CGB in a bioreactor at 28 °C for 120 h. Optimization procedures indicated that 0.97 vvm at 497.76 rpm resulted in a xanthan gum production of 5.59 g L(-1) and 1.05 vvm at 484.75 rpm maximized the biomass to 3.26 g L(-1). Moreover, the combination of 1.05 vvm at 499.40 rpm maximized the viscosity of xanthan at 0.5% (m/v), 25 °C, and 25 s(-1) (255.40 mPa s). The other responses did not generate predictive models. Low agitation contributed to the increase of xanthan gum production, biomass, viscosity, molecular mass, and the pyruvic acid concentration. Increases in the agitation contributed to the formation of xanthan gum with high mannose concentration. Decreases in the aeration contributed to the xanthan gum production and the formation of biopolymer with high mannose and glucose concentrations. Increases in aeration contributed to increased biomass, viscosity, and formation of xanthan gum with greater resistance to thermal degradation. Overall, aeration and agitation of CGB fermentation significantly influenced the production of xanthan gum and its properties.